MLZW-IV-PZ型轉移印花型用整緯裝置
數碼印花整緯機
更新時間 2022-04-08
安裝位置 | 轉印印花機 | ||
Installation location | Transfer printing machine | ||
適應車速 | 全主動型2~60米/分 | ||
Speed | Active style:2~60m/min | ||
適應范圍 | 機織織物 | 檢測緯密 | 10-350根/英寸 |
Suitable range | Woven fabrics | Weft density to be detected | 10-350picks/inch |
掘面長度 | 1400^3600 mm | 不銹鋼車昆直徑 | 100mm/125mm |
| Length of roller su rface | 1400~3600mm | Diameter of guide roiler | 100mm/125mm |
矯緯掘 | 斜報三條、彎曲轅兩條或斜根三條，彎曲琨三條 | ||
Straightening rollers | Three sloping rollers and two bowing rollers or three sloping rollers anid three. | ||
矯緯范圍 | 緯斜＜±30%織物寬，最大不超過750mm | ||
Straightening range | Bias weft< ±30% of fabric width and no wider than 750mm in max; | ||
彎掘傳動 | 主動型:彎輟主動傳輸，張力可調 | ||
Driving of bowing roller | Active style:the bowing rollers are driven active ly,ten si on can adjust | ||
探測頭數 | 4~10套探測器 | ||
Number of sensors | 4 ?lOsenors | ||
探頭位置 | 根據織物寬窄不同，探測器位置可以隨意移動（選購） | ||
| Probe position | According fabric width,the probe location free mobile(optional) | ||
信號采集方式 | （紅外線或直流燈）透射、紅外反射兩種工作模式 | ||
| Signal acquisition mode | Infrared transmission, infrared reflectance two different methods of work | ||
檢測角度 | MAX+15° | 檢測精度 | ±0.5° |
Detecting angle | MAX+15° | Detecting accuracy | ±0.5° |
斜、彎位置驅動 | 電腦控制交流變頻器實時驅動 | ||
Skew and bow position drive | Computer control ac motor-drives real-time drive | ||
客戶選配 Customer Selection | 1:活動放布架 ； 2：自動對邊裝置 3：恒張力控制系統 4:進布對中機 ； | 1: Movable Cloth Placing Rack 2: Automatic Edge Aligning Device 3: Constant Tension Control System 4: Cloth Feeding Centering Machine | |
人機界面顯示屏 | 7寸人機界面顯示屏 | ||
Man machine interface display | Man machine interface display | ||
| 電源、裝機容量 | 二相AC220V /三相AC380V, 50Hz.、2.25KVA/3.0KVA | ||
Power supply installation capacity | 2-phase AC220V/3-phase AC380V 50Hz、2.25KVA/3.0KVA | ||
重量 | 1200~2000kg | ||
Weight | 1200~2000kg | ||
- 上一篇：MLZW-IV-PZ型轉移印花型用整緯裝置
- 下一篇：沒有了！
