MLZW-IV-NK型寬幅機裝維裝置
寬幅光電整緯機
安裝位置 | 熱定型機進布口、預縮機、印花機、絲光機等后整理線中 | ||
Installation location | In after-treatment lines such as heat setter, fabric inlet,sanforiz-er,printing machine,mercerizing machine etc. | ||
適應車速 | 主動型l~100米/分被動型l~120米/分 | ||
Speed | Active style:1^100m/min Passive style:1^120m/min | ||
| 適應范圍 | 機織織物 | 檢測緯密 | 10-350根/英寸 |
Suitable range | Woven fabrics | Weft density to be detected | 10-350picks/inch |
| 輻面長度 | 2600~4000mm | 不銹鋼車昆直徑 | 125mm/150mm |
Length of roller su rface | 2600?4000mm | Diameter of guide roiler | 125mm/150mm |
矯緯掘 | 斜輻三條、彎曲輟兩條或斜驅三條，彎曲輾三條 | ||
Straightening rollers | Three sloping rollers and two bowing rollers or three sloping rollers anid three. | ||
矯緯范圍 | 緯斜＜±30%織物寬，最大不超過750mm | ||
Straightening range | Bias weft< ±30% of fabric width and no widerthan 750mm in max; | ||
彎掘傳動 | 主動型:彎輟主動傳輸，張力可調 | 被動型:彎報被動傳輸 | |
Driving of bowing roller | Active style:the bowing rollers are driven actively,tension can adjust | Passive style:the bowing rollers are driven passively | |
探測頭數目 | 8~10套探測器 | ||
Number of sensors | 8 ?lOsenors | ||
探頭位置 | 根據織物寬窄不同，探測器位置可以隨意移動(選購) | ||
Probe position | According fabric width,the probe location free mobile(optional) | ||
信號采集方式 | （紅外線或直流燈）透射、紅外反射兩種工作模式 | ||
Signal acquisition mode | Infrared transmission, infrared reflectance two different methods of work | ||
檢測角度 | MAX+15° | 檢測精度 | ±0.5。 |
Detecting angle | MAX+15° | Detecting accuracy | ±0.5° |
斜、彎位置驅動 | 電腦控制交流變頻器實時驅動 | ||
Skew and bow position drive | Computer control ac motor-drives real-time drive | ||
| 雙主控系統（選裝） | 兩套主控系統:一套正常使用,另一套作備用 | ||
Tow sets of master control system | Two sets of master control system a set of normal use, another set for alternate | ||
人機界面顯示屏 | 7寸人機界面顯示屏 | ||
Man machine interface display | Man machine interface display | ||
電源、裝機容量 | 三相 AC3800V 50 Hz.、3.0 KVA | ||
Power supply installation capacity | 3-phase AC380V 50Hz、3.0KVA | ||
重量 | 1500~2100kg | ||
Weight | 1500~2100kg | ||
- 上一篇：MLZW-IV-NK型寬幅機裝維裝置
- 下一篇：沒有了！
